Nylon Solenoid Valves

HC&TI 3/4" and 1" port solenoid plastic control valves are designed to allow maximum water flow over a wide range of pressures. The internal diaphragm allows smooth opening and closing, preventing problems with surge hazards and water hammer. The overall dimensions of either port size valves are identified, with exception of the port threads. All units are available with or without flow control unit.

Lightweight plastic construction
High flow rate with minimum pressure loss
Operation over a large range of pressures
Smooth valve opening and closing
Optional flow control stem for precise control of water flow
Manual solenoid override for opening valves in the event of power loss
3/4" or 1" NPT internally threaded ports

Electrical

Voltages Available:      AC 50/60 Hz - 12, 24, 120 or 240 Volts
                                  DC - 6, 12, 18 or 24 Volts
Power Consumption:    AC 5 Watts, DC 6 Watts
Coil Construction:        Class A (105⁰ C)

Materials

Body and Cover:       Glass Reinforced Nylon
Diaphragm:               Fabric Reinforced Polyisoprene
Seals:                       Nitrile (Buna-N), EPDM, or Fluroelastomer
Metal Components:   Stainless Steel

General

Pressure Rating:          ANSI Class 125
Operating Pressure:     10-150 PSI
Temperature Range:    Water up to 180⁰ F

All valves are 50/60 Hz, 2 way, normally closed

PART NO.	DESCRIPTION	PRICE/EA
ECI 953A-305	120 VAC 3/4" NPT PORTS	$54.16
ECI 353A-315	240 VAC 3/4" NPT PORTS	$49.20
ECI 954A-305	120 VAC 1" NPT PORTS	$62.68
ECI 954A-315	240 VAC 1" NPT PORTS	$62.68