Hydrocomponents & Technologies Inc. Manufacturers of the Finest 316SS & White PVC Pressure Vessels

Nylon Solenoid 2 Way: Normally Closed: 50/60 Hz

HC&TI 3/4" and 1" port solenoid plastic control valves are designed to allow maximum water flow over a wide range of pressures.  The internal diaphragm allows smooth opening and closing, preventing problems with surge hazards and water hammer.  The overall dimensions of either port size valves are identified, with exception of the port threads.  All units are available with or without flow control unit.

¬ Lightweight plastic construction
¬ High flow rate with minimum pressure loss
¬ Operation over a large range of pressures
¬ Smooth valve opening and closing
¬ Optional flow control stem for precise control of water flow
¬ Manual solenoid override for opening valves in the event of power loss
¬ 3/4" or 1" NPT internally threaded ports

Electrical Voltages Available: AC 50/60 Hz - 12, 24, 120 or 240 Volts DC - 6, 12, 18 or 24 Volts Power Consumption: AC 5 Watts, DC 6 Watts  Coil Construction:  Class A (1050 C) Materials  Body and Cover:  Glass Reinforced Nylon Diaphragm:     Fabric Reinforced Polyisoprene Seals:  Nitrile (Buna-N), EPDM, or Fluroelastomer Metal Components: Stainless Steel  General  Pressure Rating: ANSI Class 125  Operating Pressure: 10-150 PSI  Temperature Range: Water up to 1800 F