Instrumentation & Controls
¬Water hammer-free
¬Low noise
¬Compact design with high flow rates
¬Low maintenance
¬Coil can be locked in 4 x 90o positions, or move freely between, as required
¬Modular solenoid coil system includes different sizes and power ratings
¬Easy coil change
¬Wide range of cable plug options Type 2508
¬Double O-ring seal protects coil and valve assembly from moisture and corrosion for longer life
¬Soft seat design for a bubble tight seal.
¬ 6000 psi pressure rating (@ 200oF maximum).
¬ Replaceable Delrin seat.
¬ Straight through porting for bi-directional, high capacity flaw and easy roddable cleaning.
¬ Blow-out proof stem that provides a secondary stem seal in the full open position.
¬ Viton (R) O-Ring & Teflon back-up ring stem seals.
¬ Stem and bonnet threads are rolled for greater strength and smoother operation.
¬ Stem and bonnet sealing surfaces are burnished to a 16 RMS mirror finish.
¬ One piece bonnet with a metal to metal seal to the valve body below the bonnet threads.
¬ Bonnet lock pin to prevent accidental loosening.
¬ Vinyl bonnet and stem dust cap.
¬ .187 inch orifice size. Maximum Cv .83.
¬ Optional panel mount bonnet and panel nuts.
¬Nylon Solenoid Valves
¬Lightweight plastic construction
¬High flow rate with minimum pressure loss
¬Operation over a large range of pressures
¬Smooth valve opening and closing
¬Optional flow control stem for precise control of water flow
¬Manual solenoid override for opening valves in the event of power loss
¬3/4" or 1" NPT internally threaded ports¬HCTI Needle Valves
¬Stem O-ring seal below the threads prevent galling and contamination
¬Viton O-ring stem and bonnet seals
¬T6061 Aluminum Handle
¬Panel mount design bonnet with 316 stainless steel panel nuts
¬Stainless steel valves are 316 and highly polished
¬PVC valves are annealed dark grey
¬Panel mounting hole .625" diameter
¬Max panel thickness .200"
