Hydrocomponents Manufactures a Full Range of Spiral Wound Membranes
Residential Units | Tap Water | Low Pressure | Brackish Water | Sea Water | Nano Filtration | Ultra Filtration (50,70, 100, 150, 205, 225, 800 PSI)
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tap Water Membranes
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model # | Test Condition | Rate PSI | Permeate Flow (GPD@77°F) | Salt Rejection | Price | Buy |
| 2.5 Inch Tap Water | ||||||
MEM
2514 TW |
11 |
205 |
150 |
99.5% |
$100.00 |
|
MEM
2521 TW |
11 |
205 |
300 |
99.5% |
$120.00 |
|
MEM
2540 TW |
11 |
205 |
600 |
99.5% |
$210.00 |
|
MEM
4014 TW |
11 |
205 |
450 |
99.5% |
$180.00 |
|
MEM
4021 TW |
11 |
205 |
800 |
99.5% |
$250.00 |
|
MEM
4040 TW |
11 |
205 |
2000 |
99.5% |
$350.00 |
|
*U denotes Universal size. Universal sizes fit all 4040 membranes from all manufacturers. When placing an order, please specify membrane manufacturer and model number in order to supply the proper adapter.
Low Pressure/ Extra Low Membranes
100, 150 PSI
PDF FORM (2.5 LP)100, 150 PSI
PDF FORM (4.0 LP)
PDF FORM (2.5 XLP)
PDF FORM (4.0 XLP)
¬ 2.5 inch low pressure membrane. (Designed to fit a 2.45-2.5 inch ID housing or pressure vessel)
¬ 4.0 inch low pressure membrane. (Designed to fit a 4.0 inch ID housing or pressure vessel)
¬ 2.5 inch extra low pressure membrane. (Designed to fit a 2.45-2.5 inch ID housing or pressure vessel)
¬ 4.0 inch extra low pressure membrane. (Designed to fit a 4.0 inch ID housing or pressure vessel)
¬ Reverse Osmosis elements with thin film composite polyamide.
¬ 2.5 & 4.0 LP Permeate flow and salt rejection based on the following test conditions:1500 ppm TDS, 150psi
(1.05Mpa), 77 F (25 C),pH 7.5 and 15% recovery
¬ 2.5 & 4.0 XLP Permeate flow and salt rejection based on the following test conditions: 500 ppm TDS, 100psi
(0.7Mpa), 77 F (25 C),pH 7.5 and 15% recovery
¬ Flow rates for individual elements may vary+/-15%
| Model # | Test Condition | Rate PSI | Permeate Flow (GPD@77°F) | Salt Rejection | Price | BUY |
MEM 2514 LP |
10 |
150 |
225 |
99.4% |
$100.00 |
|
MEM 2521 LP |
10 |
150 |
450 |
99.4% |
$120.00 |
|
MEM 2540 LP |
10 |
150 |
700 |
99.4% |
$210.00 |
|
MEM 4014 LP |
10 |
150 |
650 |
99.4% |
$180.00 |
|
MEM 4021 LP |
10 |
150 |
1000 |
99.4% |
$250.00 |
|
MEM 4040 LP |
10 |
150 |
2000 |
99.4% |
$350.00 |
|
| MEM 4040 LP2 | 10 |
150 |
2600 |
99.4% |
$350.00 |
|
MEM 4040 LP3 |
10 |
150 |
3000 |
98.0% |
$350.00 |
|
MEM 2514 XLP |
10 |
100 |
250 |
99.0% |
$120.00 |
|
MEM 2521 XLP |
10 |
100 |
400 |
99.0% |
$150.00 |
|
MEM 2540 XLP |
10 |
100 |
850 |
99.0% |
$230.00 |
|
MEM 4014 XLP |
10 |
100 |
800 |
99.0% |
$200.00 |
|
MEM 4021 XLP |
10 |
100 |
1200 |
99.0% |
$250.00 |
|
MEM 4040 XLP |
10 |
100 |
2600 |
99.0% |
$390.00 |
|
Brackish Water Membranes
225 PSI
PDF FORM (2.5 BW)
PDF FORM (4.0 BW)
PDF FORM (4.0
BW-300)
¬ 2.5 inch low pressure membrane. (Designed to fit a 2.45-2.5 inch ID housing or pressure vessel)
¬ 4.0 inch low pressure membrane. (Designed to fit a 4.0 inch ID housing or pressure vessel)
¬ Reverse
Osmosis elements with thin film composite
polyamide membrane and fiberglass outer wrap.
¬ Permeate flow and salt rejection based on the following test conditions: 2000 ppm TDS, 225psi
(1.6Mpa), 77 F (25 C),pH 7.5 and 15% recovery
¬ Flow rates for individual elements may vary+/-15%
| Model # | Test Condition | Rate PSI | Permeate Flow (GPD@77°F) | Salt Rejection | Price | Buy |
| 2.5 Inch Brackish Water | ||||||
MEM
2514 BW |
12 |
225 |
150 |
99.5% |
$120.00 |
|
MEM
2521 BW |
12 |
225 |
300 |
99.5% |
$150.00 |
|
MEM
2540 BW |
12 |
225 |
600 |
99.5% |
$230.00 |
|
| 4.0 Inch Brackish Water | ||||||
MEM
4014 BW |
12 |
225 |
450 |
99.5% |
$200.00 |
|
MEM
4021 BW |
12 |
225 |
1000 |
99.5% |
$250.00 |
|
MEM
4040 BW |
12 |
225 |
2000 |
99.5% |
$390.00 |
|
| 4.0 Inch Light Brackish Water | ||||||
MEM 4014 BW-300 |
12 | 225 | 400 | 99.5% | $220.00 | |
| MEM 4021 BW-300 | 12 | 225 | 800 | 99.5% | $240.00 | |
| MEM 4040 BW-300 | 12 | 225 | 2000 | 99.5% | $350.00 | |
Sea Water/High Flow Membranes
800 PSI
PDF FORM (2.5 SW)
PDF FORM (4.0 SW)
PDF FORM (2.5 SW-HF)
PDF FORM (4.0 SW-HF)
PDF FORM (2.5 SW-B)
PDF FORM (4.0 SW-B)
¬ 2.5 inch low pressure membrane. (Designed to fit a 2.45-2.5 inch ID housing or pressure vessel)
¬ 4.0 inch low pressure membrane. (Designed to fit a 4.0 inch ID housing or pressure vessel)
¬ Reverse Osmosis elements with thin film composite polyamide.
¬ Permeate flow and salt rejection based on the following test conditions: 32000 ppm TDS, 800psi
(5.5Mpa), 77 F (25 C),pH 7.5 and 15% recovery
¬ SW-HF High flow at the lowest pressure for new applications
¬ SW-B 93% Boron rejection seawater applications
¬ Flow rates for individual elements may vary+/-15%
| Model # | Test Condition | Rate PSI | Permeate Flow (GPD@77°F) | Salt Rejection | Price | Buy |
| 2.5 Inch Sea Water Membranes | ||||||
MEM 2514 SW |
8 |
800 |
150 |
99.7% |
$150.00 |
|
MEM 2521 SW |
8 |
800 |
250 |
99.7% |
$160.00 |
|
MEM 2540 SW |
8 |
800 |
500 |
99.7% |
$250.00 |
|
| 4.0 Inch Sea Water Membranes | ||||||
MEM 4021 SW |
8 |
800 |
700 |
99.7% |
$360.00 |
|
MEM 4040 SW |
8 |
800 |
1500 |
99.7% |
$490.00 |
|
| 2.5 Inch High Flow Sea Water Membranes | ||||||
| MEM 2514 SW-HF | 8 | 800 | 200 | 99.7 | $170 | |
| MEM 2521 SW-HF | 8 | 800 | 325 | 99.7 | $190 | |
| MEM 2540 SW-HF | 8 | 800 | 650 | 99.7 | $280 | |
| 4.0 Inch High Flow Sea Water Membranes | ||||||
| MEM 4021 SW-HF | 8 | 800 | 1000 | 99.7 | $390 | |
| MEM 4040 SW-HF | 8 | 800 | 2000 | 99.7 | $550 | |
| 2.5 Inch Boron Sea Water Membranes | ||||||
| MEM 2540 SW-B | 8 | 800 | 400 | 99.75 | $250 | |
| 4.0 Inch Boron Sea Water Membranes | ||||||
| MEM 4040 SW-B | 8 | 800 | 1300 | 99.75 | $490 | |
Nano Filtration Membranes
70 PSI
PDF FORM (2.5 NF-70)PDF FORM (2.5 NF-90)
PDF FORM (4.0 NF-70)
PDF FORM (4.0 NF-90)
¬ 2.5 inch low pressure membrane. (Designed to fit a 2.45-2.5 inch ID housing or pressure vessel)
¬ 4.0 inch low pressure membrane. (Designed to fit a 4.0 inch ID housing or pressure vessel)
¬ HCTI NF90 elements with 90% monovalent ion rejection and more than 99% rejection of divalent ions are useful for water softening, removing endocrine disruption chemicals from drinking water and also food processing in small size systems.
¬ HCTI NE70 elements with medium monovalent ion rejection and more than 99% rejection of divalent ions are useful for water softening, pretreatment for seawater desalination and food concentration in small size systems.
¬ The stated performance is initial data taken after 30 minutes of operation based on the following monovalent test conditions; 2,000 mg/L NaCl solution at 75 psig (0.5 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 6.5-7.0.
¬ The stated performance is initial data taken after 30 minutes of operation based on the following divalent test conditions; 2000 mg/L MgSO4 solution at 75 psig (0.5 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 6.5-7.0.
¬ All elements are vacuum sealed in a polyethylene bag containing 1.0% sodium bi-sulfite solution.
¬ Flow rates for individual elements may vary+/-15%
| Model # | Test Condition | Rate PSI | Permeate Flow (GPD@77°F) | Rejection NaCl | Rejection (MgSO4)2 | Price | Buy |
| 2.5 Inch NF-70 Nano Filtration | |||||||
MEM 2514 NF-70 |
6 |
70 |
125 |
65.0% |
99.5% |
$130.00 |
|
MEM 2521 NF-70 |
6 |
70 |
175 |
65.0% |
99.5% |
$160.00 |
|
MEM 2540 NF-70 |
6 |
70 |
350 |
65.0% |
99.5% |
$260.00 |
|
| 2.5 Inch NF-90 Nano Filtration | |||||||
MEM 2514 NF-90 |
6 |
70 |
150 |
90.0% |
99.5% |
$130.00 |
|
MEM 2521NF-90 |
6 |
70 |
225 |
90.0% |
99.5% |
$160.00 |
|
MEM 2540 NF-90 |
6 |
70 |
450 |
90.0% |
99.5% |
$260.00 |
|
| 4.0 Inch NF-70 Nano Filtration | |||||||
MEM 4014 NF-70 |
6 |
70 |
500 |
65.0% |
99.5% |
$250.00 |
|
MEM 4021 NF-70 |
6 |
70 |
750 |
65.0% |
99.5% |
$300.00 |
|
MEM 4040 NF-70 |
6 |
70 |
1500 |
65.0% |
99.5% |
$450.00 |
|
| 4.0 Inch NF-90 Nano Filtration | |||||||
MEM 4014 NF-90 |
6 |
70 |
700 |
90.0% |
99.5% |
$250.00 |
|
MEM 4021 NF-90 |
6 |
70 |
1000 |
90.0% |
99.5% |
$300.00 |
|
MEM 4040 NF-90 |
6 |
70 |
1900 |
90.0% |
99.5% |
$450.00 |
|
Ultra Filtration Membranes
40 GPM (201 Lpm)
PDF FORM (4.0 UF Pan-50)¬ 4.0 inch low pressure membrane. (Designed to fit a 4.0 inch ID housing or pressure vessel)
¬ Oily wastewater recovery membrane removal of emulsified and free oil from machine parts, wash water, and other oil-water serparation application.
¬ 20,000 MWCO Polyacrylonitrile (PAN) Element
¬ Flow rates for individual elements may vary+/-15%
| Model # | Area | Feed Flow | Price | Buy |
| 4.0 Inch Ultra Filtration Membrane (Pan-50) | ||||
MEM-4040-PAN50-47 |
60ft2 (5.6m2) |
40 gpm (201 Lpm) |
$1,500.00 |
|
*Specification sheets are provided in Adobe PDF format. If you have trouble viewing PDF please download a copy of Adobe Acrobat Reader or Contact us.
Residential Units
50 PSI
PDF FORM (2.0 Residential) ¬ 2.0 Inch Tapwater Membrnes. (Designed to fit a 2.0 inch ID housing or pressure vessel)
¬ RO Elements with thin film composite aromatic polyamide.
¬ Membrane designed to fit a 2.0 inch ID housing or pressure vessel.
¬ Permeate flow and salt rejection based on the following test conditions: 500 ppm TDS, 50psi
(0.36Mpa), 77 F (25 C),pH 7.5 and 15% recovery
¬ Flow rates for individual elements may vary+/-15%
| Model # | Test Condition | Rate PSI | Permeate Flow (GPD@77°F) | Salt Rejection | Price | Buy |
MEM 1512-35 |
9 |
50 |
35 |
98.0% |
$30.00 |
|
MEM 1812-50 |
9 |
50 |
50 |
98.0% |
$36.00 |
|
MEM 2012-75 |
9 |
50 |
75 |
98.0% |
$50.00 |
|
MEM 2012-100 |
9 |
50 |
100 |
98.0% |
$60.00 |
|
** Flow may vary +/- 15%
*U denotes Universal size. Universal sizes fit all 4040 membranes from all manufacturers. When placing an order, please specify membrane manufacturer and model number in order to supply the proper adapter.
