Hydrocomponents & Technologies Inc.

  • The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
  • AD High Rejection Seawater Elements are selected when extremely high quality permeate is demanded from seawater that is relatively high in TDS.
  • These elements provide excellent rejection characteristics when operated at pressures exceeding 800PSI (5,516 kPa) and elevated seawater temperature conditions.
  • AD8040F High Rejection Seawater elements feature a FRP outerwrap and 27 mil feed spacers. This element is designed with flush end connections.
Sea Water Desalination
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
AD2540FF 380GPD (1.4m3/D) 26ft2 (2.4m2) 99.60% 99.20% 1223377 Contact
AD4040FF 1250GPD (4.7m3/D) 88ft2 (2.4m2) 99.60% 99.20% 1223378 Contact
AD8040F 5500GPD (20.8m3/D) 375ft2 (34.8m2) 99.60% 99.20% 1223381 Contact
Specifications are based on a 32000 mg/L NaCl solution at 800 psig feed pressure (5516kPa), 77°F,(25°C), 7% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

AG Brackish Water Desalination High Rejection

  • The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
  • AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired.
  • These elements allow moderate energy savings, and are considered a standard in the industry.
  • AG8040N-400 High Rejection Brackish Water elements feature a Net outerwrap and 27 mil feed spacers. This element is designed with flush end connections.
Brackish Water Desalination High Rejection
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
AG2425T 510 GPD (1.9 m3/d) 20ft (1.8 m2) 99.50% 99.00% 1206714 Contact
AAG2514TF 170 GPD (0.6 m3/d) 6ft2 (0.6 m2) 99.50% 99.00% 1206718 Contact
AG2521TF 325 GPD (1.2 m3/d) 12ft2 (1.2 m2) 99.50% 99.00% 1206719 Contact
AG2526TF 470 GPD (1.8 m3/d) 17ft2 (1.6 m2) 99.50% 99.00% 1205117 Contact
AG2540FF 740 GPD (2.8 m3/d) 28ft2 (2.6 m2) 99.50% 99.00% 1206727 Contact
AG2540TF 740 GPD (2.8 m3/d) 28ft2 (2.6 m2) 99.50% 99.00% 1206729 Contact
AG3218T 755 GPD (2.9 m3/d) 29ft2 (2.7 m2) 99.50% 99.00% 1206739 Contact
AG3308T 320 GPD (1.2 m3/d) 12ft2 (1.2 m2) 99.50% 99.00% 1206740 Contact
AG4014TF 585 GPD (2.2 m3/d) 22ft2 (2.1 m2) 99.50% 99.00% 1206748 Contact
AG4021TF 1050 GPD (4.0 m3/d) 42ft2 (3.9 m2) 99.50% 99.00% 1206750 Contact
AG4025T 1560 GPD (5.9 m3/d) 60ft2 (5.6 m2) 99.50% 99.00% 1206754 Contact
AG4026F 1560 GPD (5.9 m3/d) 60ft2 (5.6 m2) 99.50% 99.00% 1206756 Contact
AG4040C 2350 GPD (8.9 m3/d) 90ft2 (8.4 m2) 99.50% 99.00% 1206757 Contact
AG4040CF 2350 GPD (8.9 m3/d) 90ft2 (8.4 m2) 99.50% 99.00% 1206759 Contact
AG4040FF 2200 GPD (8.3 m3/d) 85ft2 (7.9 m2) 99.50% 99.00% 1206761 Contact
AG4040FF-CERT 2200 GPD (8.3 m3/d) 85ft2 (7.9 m2) 99.50% 99.00% 1231652 Contact
AG4040NF 2200 GPD (8.3 m3/d) 85ft2 (7.9 m2) 99.50% 99.00% 1231785 Contact
AG4040TF 2200 GPD (8.3 m3/d) 85ft2 (7.9 m2) 99.50% 99.00% 1206774 Contact
AG8040C 9850 GPD (37.3 m3/d) 380ft2 (35.3 m2) 99.50% 99.00% 1222546 Contact
AG8040F 9200 GPD (34.8 m3/d) 350ft2 (32.5 m2) 99.50% 99.00% 1206779 Contact
AG8040F-400 10500 GPD (39.7 m3/d) 400ft2 (37.2 m2) 99.50% 99.00% 1206784 Contact
AG8040F-400-CERT 10500 GPD (39.7 m3/d) 400ft2 (37.2 m2) 99.50% 99.00% 1231654 Contact
AG8040F-CERT 9200 GPD (34.8 m3/d) 350ft2 (32.5 m2) 99.50% 99.00% 1231653 Contact
AG8040N 9200 GPD (34.8 m3/d) 350ft2(32.5 m2) 99.20% 98.50% 1231784 Contact
AG8040N-400 10500 GPD (39.7 m3/d) 350ft2(32.5 m2) 99.20% 98.50% 1231786 Contact
Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

AK Brackish Water Desalination Low Energy

  • The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
  • AK Low Pressure Brackish Water Elements are selected when high rejection and low operating pressures are desired.
  • These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig (689 kPa).
  • AK2514TF Low Pressure Brackish Water elements feature a tape outerwrap and 28 mil feed spacers.
  • This element is designed with male end connections.
Brackish Water Desalination High Rejection (Low Energy)
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
AK2514TF 170 GPD (0.6 m3/d) 6 ft2 (0.6 m2) 99.00% 98.00% 1220798 Contact
AK2514TF 170 GPD (0.6 m3/d) 6 ft2 (0.6 m2) 99.00% 98.00% 1220798 Contact
AK2521TF 325 GPD (1.2 m3/d) 12 ft2 (1.2 m2) 99.00% 98.00% 1206799 Contact
AK2526TF 470 GPD (1.8 m3/d) 17 ft2 (1.6 m2) 99.00% 98.00% 1223315 Contact
AK2540FF 710 GPD (2.7 m3/d) 29 ft2 (2.7 m2) 99.00% 98.00% 1206800 Contact
AK2540TF 710 GPD (2.7 m3/d) 27 ft2 (2.5 m2) 99.00% 98.00% 1206802 Contact
AK3218T 755 GPD (2.9 m3/d) 29 ft2 (2.7 m2) 99.00% 98.00% 1206803 Contact
AK3308T 320 GPD (1.2 m3/d) 12 ft2 (1.2 m2) 99.00% 98.00% 1226806 Contact
AK4014TF 585 GPD (2.2 m3/d) 21 ft2 (2.0 m2) 99.00% 98.00% 1220979 Contact
AK4021TF 1,050 GPD (4.0 m3/d) 42 ft2 (3.9 m2) 99.00% 98.00% 1206812 Contact
AK4040C 2,475 GPD (9.4 m3/d) 95 ft2 (8.8 m2) 99.00% 98.00% 1223696 Contact
AK4040CF 2,350 GPD (8.9 m3/d) 90 ft2 (8.4 m2) 99.00% 98.00% 1227885 Contact
AK4040FF 2,200 GPD (8.3 m3/d) 85 ft2 (7.9 m2) 99.00% 98.00% 1206813 Contact
AK4040FF-CERT 2,200 GPD (8.3 m3/d) 85 ft2 (7.9 m2) 99.00% 98.00% 1231655 Contact
AK4040NF 2,200 GPD (8.3 m3/d) 85 ft2 (7.9 m2) 98.50% 98.00% 1231787 Contact
AK4040TF 2,200 GPD (8.3 m3/d) 89 ft2 (8.3 m2) 99.00% 98.00% 1206816 Contact
AK8040C 9,900 GPD (37.5 m3/d) 380 ft2 (35.3 m2) 99.00% 98.00% 1206819 Contact
AK8040F 9,200 GPD (34.8 m3/d) 365 ft2 (33.9 m2) 99.00% 98.00% 1206820 Contact
AK8040F-400 10,500 GPD (39. m3/d) 400 ft2 (37.2 m2) 99.00% 98.00% 1206821 Contact
AK8040F-400-CERT 10,500 GPD (39. m3/d) 400 ft2 (37.2 m2) 99.00% 98.00% 1231656 Contact
AK8040N 9,200 GPD (34.8 m3/d) 350 ft2 (32.5 m2) 98.50% 98.00% 1231788 Contact
AK8040N-400 10,500 GPD (39. m3/d) 400 ft2 (37.2 m2) 98.50% 98.00% 1231789 Contact
Specifications are based on a 500 mg/L NaCl solution at 115 psig operating pressure (793 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

CD Desalination C-Series® High Rejection

  • The C-Series family, a triacetate/diacetate blend, has a higher flux and better mechanical stability than standard cellulose acetate.
  • C-Series elements offer an increased chlorine tolerance compared to thin-film elements, as well as a smooth-surface membrane for difficult water applications.
  • CD High Rejection Elements are used for brackish water desalination at 425 psig (2,930 kPa) operating pressure.
  • CD8040F High Rejection Brackish Water elements feature a FRP outerwrap and 28 mil feed spacers.
  • This element is designed with flush end connections.
Brackish Water Desalination C-Series (High Rejection)
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
CD4025T 1,025 GPD (3.9 m3/d) 55 ft2 (5.1 m2) 98.50% 96.50% 1206834 Contact
CD4040F 1,600 GPD (6.1 m3/d) 90 ft2 (8.4 m2) 98.50% 96.50% 1206835 Contact
CD8040F 6,000 GPD (22.7 m3/d) 350 ft2 (32.5 m2) 98.50% 96.50% 1206837 Contact
Specifications are based on a 2000 mg/L NaCl solution at 425 psig operating pressure (2930 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

CE Brackish Water Desalination C-Series® Sanitary RO Elements

  • The C-Series family, a triacetate/diacetate blend, has a higher flux and better mechanical stability than standard cellulose acetate.
  • C-Series elements offer an increased chlorine tolerance compared to thin-film elements, as well as a smooth-surface membrane for difficult water applications.
  • CE Brackish Water Elements are used for brackish water desalination at 425 psig (2,930 kPa) operating pressure.
  • CE8040F Brackish Water elements feature a FRP outerwrap and 28 mil feed spacers.
  • This element is designed with flush end connections.
Brackish Water Desalination C-Series (High Rejection)
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
CE2026TF 245 GPD (0.9 m3/d) 10ft2 (1.0m2) 97.50% 95% 1206846 Contact
CE2540FF 630 GPD (2.4 m3/d) 27ft2 (2.5m2) 97.50% 95% 1206854 Contact
CE4025T 1,300 GPD (4.9 m3/d) 59ft2 (5.5m2) 97.50% 95% 1206870 Contact
CE4026F 1,300 GPD (4.9 m3/d) 59ft2 (5.5m2) 97.50% 95% 1206875 Contact
CE4040C 2,150 GPD (8.1 m3/d) 95ft2 (8.8m2) 97.50% 95% 1206877 Contact
CE4040F 2,100 GPD (7.9 m3/d) 95ft2 (8.8m2) 97.50% 95% 1206878 Contact
CE4040FF 2,000 GPD (7.6 m3/d) 85ft2 (7.9m2) 97.50% 95% 1231443 Contact
CE4040NF 2,000 GPD (7.6 m3/d) 85ft2 (7.9m2) 97.00% 95% 1231790 Contact
CE8040F 8,000 GPD (30.3 m3/d) 350ft2 (32.5m2) 97.50% 95% 1206880 Contact
CE8040N 8,000 GPD (30.3 m3/d) 350ft2 (32.5m2) 97.00% 95% 1231791 Contact
Specifications are based on a 2000 mg/L NaCl solution at 425 psig operating pressure (2930 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

CG Brackish Water Desalination C-Series® High Flux

  • The C-Series family, a triacetate/diacetate blend, has a higher flux and better mechanical stability than standard cellulose acetate.
  • C-Series elements offer an increased chlorine tolerance compared to thin-film elements, as well as a smooth-surface membrane for difficult water applications.
  • CG High Flux Elements are used for brackish water desalination at 225 psig (1,551 kPa) operating pressure.
  • CG8040F High Flux Brackish Water elements feature a FRP outerwrap and 28 mil feed spacers
  • This element is designed with flush end connections.
Brackish Water Desalination C-Series (High Flux)
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
CG2540FF 600 GPD (2.3 m3/d) 27 ft2 (2.5 m2) 93% 85% 1206891 Contact
CG4040F 2,000 GPD (7.6 m3/d) 90 ft2 (8.4 m2) 93% 85% 1206893 Contact
CG8040F 7,300 GPD (27.6 m3/d) 350 ft2 (32.5 m2) 93% 85% 1206896 Contact
Specifications are based on a 500 mg/L NaCl solution at 210 psig operating pressure (1448 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

CK Water Softening C-Series® Nanofiltration

  • The C-Series family, a triacetate/diacetate blend, has a higher flux and better mechanical stability than standard cellulose acetate.
  • C-Series elements offer an increased chlorine tolerance compared to thin-film elements, as well as a smooth-surface membrane for difficult water applications.
  • CK High Flux Elements are used for water softening at 200 psig (1,379 kPa) operating pressure.
  • CK8040N Nanofiltration elements feature a Net outerwrap and 28 mil feed spacers.
  • This element is designed with flush end connections.
Water Softening C-Series (Nanofiltration)
Model Flow Active Area Avg. Rejection Min. Rejection Part Number Price
CK2540FF 600 GPD (2.3 m3/d) 27 ft2 (2.5 m2) 97% 94% 1231009 Contact
CK4040FF 2,000 GPD (7.6 m3/d) 90 ft2 (8.4 m2) 97% 94% 1233930 Contact
CK8040F 9,500 GPD (36.0 m3/d) 380 ft2 (35.3 m2) 97% 94% 1233927 Contact
CK8040N 9,500 GPD (36.0 m3/d) 378 ft2 (35.1 m2) 97% 94% 1231792 Contact

Low Fouling DuraSlick™ Nanofiltration

  • Duraslick™ is a new series of thin-film membrane elements engineered for use with fouling-prone brackish water applications.
  • Duraslick is designed to utilize an innovative three-layer membrane, of which a proprietary middle layer creates extreme smoothness.
  • Independent studies have demonstrated that Duraslick elements are superior to standard polyamide spiral wound membrane elements for desalination of difficult feed water sources.
  • Duraslick NF elements retrofit existing NF systems to obtain lower fouling, reduced overall energy usage, increased membrane service life and an extension of operating time between required cleanings, which in turn reduces expenditures on required chemicals.
  • Duraslick NF Elements provide a high rejection of divalent and multivalent anions while monovalent ion rejection is dependent upon feed concentration and composition.
  • DURASLICK NF 8040 Low Fouling Nanofiltration elements feature a FRP outerwrap and 31 MIL feed spacers. This element is designed with flush end connections.
Low Fouling DuraSlick™(Nanofiltration)
Model Flow Active Area Avg. Rejection Part Number Price
DURASLICK NF 2540 690 GPD (2.6 m3/d) 24 ft2 (2.2 m2) 98.60% 1234385 Contact
DURASLICK NF 4040 2,200 GPD (8.3 m3/d) 78 ft2 (7.2 m2) 98.60% 1234307 Contact
DURASLICK NF 8040 10,200 GPD (38.6 m3/d) 350 ft2 (32.5 m2) 98.60% 1234182 Contact
Specifications are based on a 2000 mg/L MgSO4 solution at 100 psig operating pressure (690 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -25%.

Low Fouling High Solids DuraSlick™ Nanofiltration

  • Duraslick™ is a new series of thin-film membrane elements engineered for use with fouling-prone brackish water applications.
  • Duraslick is designed to utilize an innovative three-layer membrane, of which a proprietary middle layer creates extreme smoothness.
  • Independent studies have demonstrated that Duraslick elements are superior to standard polyamide spiral wound membrane elements for desalination of difficult feed water sources.
  • Duraslick NF elements retrofit existing NF systems to obtain lower fouling, reduced overall energy usage, increased membrane service life and an extension of operating time between required cleanings, which in turn reduces expenditures on required chemicals.
  • Duraslick NF Elements provide a high rejection of divalent and multivalent anions while monovalent ion rejection is dependent upon feed concentration and composition.
  • DURASLICK NF 8040 HS Low Fouling Nanofiltration elements feature a FRP outerwrap and 31 MIL feed spacers. This element is designed with flush end connections.
Low Fouling High Solids DuraSlick™(Nanofiltration)
Model Flow Active Area Avg. Rejection Part Number Price
DURASLICK NF 4040 HS 1,700 GPD (6.4 m3/d) 60 ft2 (5.6 m2) 98.60% 1234405 Contact
DURASLICK NF 8040 HS 7,600 GPD (28.8 m3/d) 263 ft2 (24.4 m2) 98.60% 1234183 Contact
Specifications are based on a 2000 mg/L MgSO4 solution at 100 psig operating pressure (690 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -25%.